Find Steel Pole, Electric Pole, Power Pole on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Electric Transmission Pole > 69kv Africa Octognal 27.5m 18kn Metal Power Pole

69kv Africa Octognal 27.5m 18kn Metal Power Pole

Basic Info

Model No.:  metal power pole

Product Description

Model NO.: metal Power Pole Model Number: Electric Pole Surface Treatment: Hot DIP Galvanization Welding Standard: Aws D 1.1 Transport Package: Nude Package Origin: Jiangsu Yixing Type: Electric Steel Pole Design: Customiszed Dimenstion Torlance: +- 2% Trademark: Milkyway Specification: ISO HS Code: 73089000 69kv Africa Octognal 27.5m 18kn metal power pole


Company Introduction:
Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on
We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia and so on


 
Type                 69kv Africa Octognal 27.5m 18kn metal power pole
Suit for  Electricity distribution 
Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical
Material Usually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, 
SS490, to ST52-
Torlance of the dimenstion +- 2%
Power 10  KV ~550 KV
Safety Factor Safety factor for conducting wine : 8 
Safety factor for grounding wine : 8
Design Load in Kg 300~ 1000 Kg appliced to 50cm from the to pole
Marks Nane palte through rivert or glue ,engrave ,emboss as per customer requirement
Surface treatment Hot dip galvanized Following ASTM A 123, 
color polyester power or any other standard by client required
Joint of Poles Insert mode,innerflange mode,face to face joint mode
Design of pole Against earthquake of 8 grade
Wind Speed 160 Km/Hour .  30 m /s
Minimum yield strength 355 mpa
Minimum ultimate tensile strength 490 mpa
Max ultimate tensile strength 620 mpa
Standard ISO 9001
Length of per section Within 14m once forming without slip joint
Welding We has past flaw testing.Internal and external double welding makes 
the welding beautiful in shape 
Welding Standard :AWS ( American Welding Society ) D 1.1
Thickness 1 mm to 30 mm
Production Process Rew material test → Cuttingj →Molding or bending →
Welidng (longitudinal )→Dimension verify →Flange welding
→Hole drilling →Calibration → Deburr→Galvanization or 
powder coating ,painting →Recalibration →Thread →Packages
Packages Our poles as normal cover by Mat or straw bale at the top and bottom ,
anyway also can following by client required , each 40HC or OT can 
loading how many pcs will calculation base on the client actually 
specification and data
 
 
 Packaging & Shipping
Our poles as normal cover by Mat or straw bale at the top and bottom  and wood between the poles to avoide the damage on the galvanization of the pole  ,anyway also can following by client required , The loading capacity of 40HC or OT an be calulated calculation base on the client actually specification and data.

Material
 
All of our material are purchased from famous mill factory to assure the quality
 
A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .
Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.- Octognal 220KV 25m metal power pole supplier for middle east

Manufacture Tolerance
-Component Length:-25mm to 75mm
-Straightness:2mm/m
-Twisting degree:1°per 3 meters length
-Ovalisation:Maximum is 3%
-The average diameter:+/-0.5%
-Slip length:+/-150mm

Installation
-Remove all the equipment on the pole during Assembly.
-Circle a sling around th epole shaft of each section.
-Fix the sling on top section to one pulley block.
-The sling on the bottom section is tightly fixed and fixed at the center of gravity.
-Make the steel pole vertical by tighten the sling of the top section.
-Fix the steel pole.
-Remove the sling.

 

Contact us if you need more details on Steel Pole. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Electric Pole、Power Pole. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Electric Transmission Pole