Standard Steel Poles for 69kv Transmission Line

Model NO.: Steel Poles Conductor Circuit: Customized Materials: Steel Style: Pole Height: 25FT-100FT Welding Standard: Adws D1.1 Pole Type: Burial Type or Flange Type Certificate: ISO9001 Thickness: 2.5mm to 10mm or Customized Transport Package: Naked Package or Customized Origin: Jiangsu, China Usage: Angle Tower, Terminal Tower Certification: ISO Standard: Nonstandard Structure: Pole Material: Steel,Q235,Q345 Galvanization Standard: ASTM A123 Test: Load Test Shape: Round or Conical Trademark: Milky Way Specification: Electric Pole HS Code: 73089000 standard steel poles for 69kv transmission line

Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
 
Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on
 
We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia and so on.
 

Electric Pole Specification in Africa
Height(M)	Load (KN)	Top Dia(mm)	Bottom Dia(mm)	Thickness(mm)	Pole Shape
11.8	5	150	355	3	8
11.8	6.5	180	400	3	8
11.8	8	190	440	3	8
11.8	10	190	450	3	8
11.8	12.5	220	500	3.5	8
11.8	16	230	560	3.5	8
11.8	20	240	585	4	8
11.8	32	260	660	5	8

 

Part No	standard steel poles for 69kv transmission line
Height	6m to 30m or other height customer requirement
Suit for	Electric Power Distribution Transmission steel tower
Shape	Conoid ,Multi-pyramidal,Columniform,polygonal or conical
Material	Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52
Strength	2.5KN,5KN,8KN,10KN,12KN
Torlance of the dimenstion	+- 2%
Optical assembly of lighting fixture	IP 65
Electroshock resistant protective grade	Grde I
The casing anti-corrosion performance	Class II
Working atmosphere of lighting fixture	-35 ºC~+45 ºC
Surface treatment	Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required
Joint of Poles	Insert mode,innerflange mode,face to face joint mode
Design of pole	Against earthquake of 8 grade
Wind Speed	160km/hour
Minimum yield strength	335mpa
Minimum ultimate tensile strength	400mpa
Max ultimate tensile strength	620mpa
Standard	ISO9001
Length of per section	Within 14m once forming without slip joint
Welding	We has past flaw testing.Internal and external double welding makes the welding beautiful in shape  Welding Standard :AWS ( American Welding Society ) D 1.1
Thickness	1mm to 30mm
Production Process	Raw material test → Cuttingj →Molding or bending →Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Packages	Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.
Style	Size and styles are veriable as per customer request

 
Production Process
 
As an BV ,ISO ,SGS approved supplier in China ,we have more than 20 years produce and export Steel Pole ,and we can assure the pole we offered is of sound quality which made from qualified material with our professional workers and advance equipment .


Material
 
All of our material are purchased from famous mill factory to assure the quality
 
A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .
Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.
 
Inspection
 
To assure our products qualified ,we take steps as follows :
 
1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management .
 
2.Introducing ISO management ,We are awared ISO 9001:2008 certificate . .
 
3.QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore every shipment.
Design and Detail
 
 Lofting and design software :We have transmisson Power Pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly


 

Contact us if you need more details on Steel Poles. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Standard Steel Poles、69kv Steel Poles. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Electric Transmission Pole