Electric Transimission Tower Octagonal Power Poles
Product Description
Steel tower,steel pole,1000kv and under electric angle steel transmission line tower, electric power transmission tubular tower,electric transmisssion steel pole/monopole,lattice angular tower,substation/railway steel structure and related steel structure. -Original design and manufacture in accordance with domestic or ANSI/TIA-222-G Note:Only our company can offer this design code within China mainland ,which give us an edge over competitors. -Galvanization:ISO 1461/ASTM A123 -Material:ASTM A572,S355,Q345/Q235,etc -Material Code:GB/T1591-2008,GB/T700-2006 -Reliable qualification(ISO9001:2000) -Excellent service including supervision and supplementary components -Custom designs and operational decorative solutions -Excellent service including supervision and supplementary components-Custom designs and operational decorative solutions To design in accordance with PLS software ,we need following design parameters: 1. The operational wind speed of the region where the Tower will be use 2. The Antennas loading of the Tower and at what height 3. The Total height of the Tower itself.
Type | Electric transimission tower octagonal power poles, Galvanized electrical pole |
Suit for | Electricity accessories |
Shape | Multi-pyramidal,Columniform,polygonal or conical |
Material | Normally Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- |
Torlance of dimenstion | +- 1% |
Power | 10 KV ~550 KV |
Safety Factor | Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 |
Design Load in Kg | 300~ 1000 Kg appliced to 50cm from the to pole |
Marks | Name palte through rivert or glue ,engrave ,emboss as per customers requirements |
Surface treatment | Hot dip galvanized Following ASTM A123, color polyester power or any other standard by clients required. |
Joint of Poles | Insert mode ,inner flange mode ,face to face joint mode . |
Design of pole | Against earthquake of 8 grade |
Wind Speed | 160 Km/Hour . 30 m /s |
Length of per section | Within 14m once forming without slip joint |
Welding | We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 |
Thickness | 2 mm to 30 mm |
Production Process | material checking→Cutting→Molding or bending→Welidng (longitudinal )→Dimension verify→Flange welding→Hole drilling→Calibration→Deburr→Galvanization or powder coating ,painting→Recalibration→Thread→Packages |
Packages | Our poles as usual are covered by Mat or straw bale at the top and bottom ,anyway we can also follow clients required , each 40HC or OT can load pieces according to calculation which bases on the clients’ actual specification and data. |
Product Categories : Transmission pole > Transmission pole
Premium Related Products